In part 4, we discussed styles in your Civil 3D template. How do you ensure your styles will be used? Feature Settings are the key to setting default styles and settings. Feature Settings (and their partner, Command Settings) are a critical component to productivity in Civil 3D because we generally don’t want the user to worry about the default settings when creating data. Let’s look at an example.
Typically, any civil engineering project will include alignments, profiles, and profile views. Profile views are a wonderful tool for exploring your data in the 3rd dimension. I encourage users to create profile views to assist with design. When creating a profile view, you must click next five times in the form to view all the settings for the profile view:After five clicks, you will get to click finish. However, if you use feature settings to set the default style, default name, and default band set, there’s no need to click Next. Instead, you can directly click the Create Profile View button. In the end, the user is designing and modeling without worrying about defaults and settings – that’s the goal.
Editing Feature Settings
Open your Civil 3D template, and in Toolspace, on the Settings tab. Start at the top and work your way down.Right-click General, and click Edit Feature Settings.Under Default Styles, you can set the default styles for note, line, and curve labeling. Don’t be overwhelmed by all of the properties that you can edit here. Generally you will only concern yourself with a select few. For example, with profile views you would be interested in the following:
Notice the properties with a profile view icon. Those are the properties that you should concern yourself with. The remaining properties are dealt with globally in Drawing Settings. Don’t worry about these.
I generally touch default styles for all feature settings. But there are other settings not related to styles that are also important. Following are a couple of examples.
I’m not a big fan of the default naming formats for Civil 3D objects such as :
So I edit the default name formats often. Here’s an example:With this setting, when creating a design profile, the default name will be “Main Street Layout” where ‘Main Street’ is the alignment name and ‘Layout’ is the profile type. That’s okay, but I want to take it a step further. I want the profile type to be EGC for a surface profile and FGC for a design profile. This is possible by overriding this setting with a command setting. In Toolspace, on the Settings tab, expand Profile, expand Commands, and right-click and click EditCommand Settings for CreateProfileFromSurface and CreateProfileLayout: You can use command settings to take your settings a step further and set the defaults depending on the command executed. In this case, the command setting is overriding the feature setting.
"Alignment - (1)"
Pipe Network Settings
When placing a profile label for a sewer or storm drain structure, you generally want the label above or below the structure. If you want to label both above and below, you need to change this setting accordingly:Conclusion
Feature Settings and Command Settings are just as critical in your Civil 3D template as Styles. This tool for setting default settings will make users more productive. Further, they will use the styles that you want them to use. In the next part of this series, we’ll discuss Survey.